SRM6130

Industrial Wireless Solution/ Wireless Modem/ SRM6130

SRM6130 Unlicensed Wireless Serial Radio Modem 2.4-2.4835 GHz

Introduction

The SRM6130 employs Smart SpectrumTM frequency hopping spread spectrum (FHSS) technology in the 2.4-2.4835 GHz frequency band for secure, robust communication. Data-Linc Group’s FHSS technology, coupled with 32-bit CRC error detection and AES Encryption enables the SRM6130 to reliably and securely deliver critical information.

RF site surveys are usually unnecessary and an FCC site license is not required. The SRM6130 wireless technology eliminates the need for hard wire or fiber cable, which is often expensive and difficult to install.

The SRM6130 supports a number of configurations, including point-to-point , point- to-multipoint as well as multiple Repeaters if required. Multipoint operation permits an unlimited number of Remotes. The SRM6130 can also function as a Repeater/Remote to extend range or communicate around obstructions. Back- to-back radio modems are not required for Repeater function.

Features

Range of 16 km (10 miles)
SmartSpectrumTM technology for maximum data integrity in noisy, industrial environments
RS-232/RS-485 data ports
AES-256 bit Encryption
Separate RS-232 DB9 port for configuration
Operates as Master, Remote, Repeater or Repeater/Remote
User adjustable hop patterns and frequency zones for refined operation of close proximity networks
Replacement for any legacy SRM serial
Factory or field configured for easy, trouble-free installation
Optional DIN rail mountings

Industrial Applications

The SRM6130 Radio Modem is ideal for industrial automation systems with:

PLCs located on moving platforms, overhead cranes and turntables or other revolving equipment
Remote PLC programming
SCADA systems, such as water/wastewater, utilities and oil/gas systems
Underground or off-shore communications
High RFI environments (e.g., steel, manufacturing)
Industrial automation machine control on plant floors